Samsung 4.Disassembly and Reassembly free download

File name 4.Disassembly_and_Reassembly.pdf

3. Disassembly and Reassembly MAGNETRON, MOTOR ASSEMBLY, VENT BLOWER AND HIGH VOLTAGE TRANSFORMER Oven must be removed from wall. REMOVING OVEN FROM WALL (2 PEOPLE REQUIRED) Disconnect the power cord from the outlet. The oven is hooked on the metal tabs of the wall mounting plate that is secured to the wall. It is not necessary to remove this mounting plate to service this unit. This unit is attached to the cabinet above by two self aligning screws. Support the unit while removing these screws allowing it to hinge downward to disengage the unit from the mounting plate. House Duct Be aware there may also be a connection to the range vent ductwork that is attached to the top or back of the unit through an exhaust adapter/damper. Remove the oven from the wall 9 3. Disassembly and Reassembly 3-1 Replacement of High Voltage Transformer Parts Explaination Photo Explaination 1. Disconnect oven power. 2. Remove Grille. Grille 1) Remove 2 screws 2) Slide the Grille to the left, then pull it straght out. 3. Remove Panel Outer by Panel Outer pulling it to the rear of the set. 10 3. Disassembly and Reassembly 3-1 Replacement of High Voltage Transformer Parts Explaination Photo Explaination 4. Discharge the High voltage capacitor. High voltage capacitor 5. Disconnect all the leads. 6. Remove Base Bottom Base bottom. HV Trans 7. Take out the HV Trans. 11 3. Disassembly and Reassembly 3-2 Replacement of Magnetron Parts Explainati